SONIC ELECTRIC SHUTOFF
Description:
To convert the standard shutoff to a remote sonic version, the standard interface cable is replaced with the Sonic Receiver Assembly.
Typical interface is interchangeable for both the interconnect cable and the Sonic Receiver board. Either interface connection plugs into the electric shutoff, depending on which interface option is chosen. In some cases a sonic version of the shutoff device may be required. If this is the case, the audible alarm is required to shut off the stove via the optional Sonic Receiver Board. (See FIGURE 9) |
 FIGURE 15
Reset Stove
-
The electric stove shutoff unit may be reset by locating the circuit breaker supplying power to the stove and turning it off and then back on, or
-
Momentarily unplugging the shutoff from the wall outlet and plugging it back in.
NOTE: Method two (2) requires the stove circuit Breaker to be in the “ON” position. Method one (1) is preferable since the stove does not need to be moved. |
HOME
