| TROUBLE SHOOTING POINTS |
| PROBLEM |
CAUSE |
CORRECTION |
Low Pressure
No Pressure |
Inadequate cable tension
Leak
Weak tension spring
Cable slipping |
Retention cable
Recharge/leak test
Replacing spring
Tighten machine screw
attached to hex nut |
| Corner pulley not secure |
Loose fitting on corner
Loose screw on corner pulley
|
Tighten
Tighten |
Fire extinguisher
mounting bracket not
secure |
Support screws loose |
Tighten or replace screws |
Fire detection not
positioned over range top
elements |
Worn tension spring
Cable slipping |
Replace spring
Readjust cable and replace or
tighten machine screw
fitted with hex nut |
Appliance nozzle not
aimed at range top center |
Range Repositioned
Loose adjustment screw(s) |
Reposition Range
Re-aim nozzle and tighten
adjustment screw(s) |
HOME